If your miter saw won't turn enough...... you need to turn the wood instead.....
Maybe....depending on the saw/cut......
Attach a wedge to the fence to force the wood away from the fence to the cutting angle......
or......
Attach a table and fence 90º to the existing fence......Is the 65º within range now ?
In both cases you'll need to trim your stock to approximate length before attempting the miter......
"...measure once.....cut twice....throw that one away and cut a new one...." |
Member Since
08/11/2002
Total Contributions
2104 Posts
|
Moderated by Handyman 
