|
|
You are at page 1 of 43  1 2 3 4 5 6 7 8 9 
|
| G-90
|
|
A coating weight for galvanized sheet metal, 0.90 ounces of zinc per sq. ft., measured on both sides of the sheet. |
| G.i. loan guarantees
|
|
Home loans backed by the Veterans Administration which issues a 60% loan guarantee for an amount up to $27,500 as a mortgage on a principal residence only and with no down payment. |
| Gable
|
|
A triangular-shaped portion of the endwall of a building directly under the sloping roof and above the Eave line. |
| Gable area
|
|
The triangular surface wall that runs between the sloping ends of a ridge roof, on the gable end of the building, and the top wall plate. |
| Gable decoration
|
|
A triangular decorative feature, such as over a door or window. |
| Gable dormer
|
|
Dormer that is built into a gable roof. |
| Gable end
|
|
Triangular wall enclosed by the sloping ends of a ridged roof and the top wall plate. The entire section, including wall, roof and space enclosed is referred to in that manner. |
| Gable end brace
|
|
The brace that runs from the roof ridge board at the gable end to the top wall plate at the gable end and adds stability to the ridge board. |
| Gable end stud
|
|
Stud which goes upward from the end wall of the horizontal gable top wall plate to the end rafter. |
| Gable roof
|
|
A type of roof with sloping planes of the same pitch on each side of the ridge. Has a gable at each end. |
You are at page 1 of 43 1 2 3 4 5 6 7 8 9
|
|
|
|
|
|
