Step 8: Disconnect the hot-water hose and connect the new line
Disconnect the hot-water hose from the inlet at the back of the washing machine. Attach the new stainless-steel hose by tightening the fittings by hand and then with a turn of the pliers. Do not over-tighten.
 After you disconnect the old hose from the machine, tighten the fitting on the new stainless-steel hose.
|
|
|
 |
| The water supply must be completely closed before you disconnect hoses. If there is any leaking water, shut off the main water supply until the project is complete. |
|
 |
|
|
|
|
